The plastic fitting that secures the stock choke cable to the carburetor is delicate and easily broken. A broken fitting can cause hard to solve idling and running problems.
CNC machined from billet aluminum and anodized black or blue. If you want to retain your handlebar mounted choke this may be the solution.
These no longer fit the new version of the ProCycle Remote Choke Cable. Will not work with the long or short reach choke knobs.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
- Provides a simple and affordable solution to carburetor tuning problems.
- Allows you to tune your bike for increased power and smoothness while retaining fuel economy.
- Includes a guide booklet on how to install and use your jet kit to it's full potential.
- For a top quality installation we recommend adding an extended fuel screw and a set of replacement carburetor screws.
The OEM foam secondary filter can deteriorate rather quickly. Once that happens, it can allow enough dirt into the engine to do significant damage. Replace your filter now with a high-quality foam filter from industry leader Twin Air.
This filter needs to be oiled like any air filter to work properly.
Only for bikes with the stock BST40 carburetor!
Wiseco 96mm/+1.00 mm piston with rings, wrist pin, circlips, head gasket, and base gasket.
Requires your cylinder to be bored to fit the larger piston.
All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.
Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions
Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-perfomance racer and recreational enthusiast with the finest forged piston available in today’s market place.
- Cleanable and reusable filter
- 35 micron stainless steel mesh
- Stainless check ball and stainless spring
- CNC aluminum caps front and rear
Now available in the original version or the Ultra version. The original uses the front two emitters for low beam and then switches to the rear two emitters for high beam. The Ultra uses the front two emitters for low beam and then runs all 4 emitters on high beam at a reduced wattage. Wattage is 38 watts on low and 38 watts on high.
This bulb uses 4 Cree XHP 50 emitters, capable of more than 2500 lumens each. At 5000 lumens on each function, this is the brightest Cyclops H4 bulb.
- All metal construction for bases and collars
- Better thermal efficiency
- Better beam pattern distinction between high and low beams
- 5600k
- 38 watts
- Removable metal base plate for easy install.
- Screw on connectors at driver
- Standard H4 connector
- High/Low Beams
*UNIVERSAL PART, PLEASE CHECK YOUR APPLICATION FOR FITMENT
High Quality chain. Will need to be cut to fit your sprocket combination.
Lower friction and longer life. X-rings have twice the sealing ability as compared to o-rings. They do a better job of keeping the lube in the links and the dirt out. DID VX chains have a reputation for being the best chain you can buy for dual sport riding. DID VX chains come with rivet type master links.
A stainless steel front fender brace. Helps stabilize your front fender.
Gives additional strength for carrying a fender mounted tool bag.
Fits on top of the fender and bolts between the fender and bottom triple clamp. Stainless steel won't rust or corrode. Includes hardware.
Requires you to drill one hole in the fender for mounting.
This Kit replaces vital components in the BST40 Carburetor including new a Float, Needle Valve, Gaskets, Seals, Diaphragm, Spring and Float Bowl Screws to return the stock Mikuni BST40 Carburetor to like-new operation. As a bonus we have included Viton o-rings for the float assembly and 4 stainless steel allen screws.
Replacement socket head (Allen) screws for the OEM BST40 Carburetor. The factory screws that hold the top cap and float bowl on the stock carburetor are very easily damaged. The originals are usually installed unbelievably tight from the factory. It is common to ruin the stock screws when installing a jet kit or doing any other carburetor maintenance. Sold in a pack of four. Two for the cap and two for the float bowl.
Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
You pay $3.70 per filter with our value 10-pack!
First there was the Warp 9 "4-Finger" Lever, now there is the Warp 9 "3-Finger" Lever Exclusive to ProCycle. Yep, the original shorty (next item below) is a full 4-finger type lever. These are a full half inch shorter. You asked for 3-finger levers, and we had Warp 9 make them for us. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. Will not fit with the stock OEM wind deflectors.
Will not engage the clutch switch on 2010 and later models
Stock suspension suffers from poor compression damping and limp rebound damping. The Race Tech Gold Valve allows you to tune both compression and rebound valving for vastly improved performance.
- Bolt-on shock valving for serious suspension performance
- Improves control, traction, plushness and bottoming resistance
- Improved, long-wearing, low-friction sealing design decreases fade
- Includes complete instructions
A popular upgrade from the stock vacuum operated fuel valve. Manually operated. Must be shut off any time the bike is parked for more than a few hours. Fits stock tank or aftermarket tank and has both main and reserve. Fully rebuildable.
We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include billet a Warp 9 hub available in 5 colors and SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
- New OEM or Warp9 hub with bearings and seals installed
- 1.60" x 21" Off-Road
- 1.85" x 21" Dual-Sport
- 2.15" x 19" Adventure
- 2.50" x 19" Adventure (Sun rims are 2.75")
- 2.50" x 18" Street
- 3.50" x 17" Supermoto
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
Please allow 2-3 weeks for delivery.
Cannot be canceled.
Need a few spokes to freshen up your old wheel? Suzuki only sells spokes in complete sets. Here we have individual spokes with nipples so you can get only the spokes you need. Rear spokes are 2 different sizes. The left side - sprocket side - is shorter than the right side.
These spokes fit the original OEM hub and rim only. If you need spokes for custom wheels please contact us.
Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.
Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.
The OEM vent foam filter can deteriorate after only a couple of years. When it does it can allow enough dirt into the engine to do significant damage. Replace your filter now with a washable cotton & steel screen filter.
This filter is recommended to be oiled like any other air filter to work properly.
Only for bikes with the stock BST40 carburetor!
Your automatic cam chain tensioner is spring loaded. This can make it difficult to install as it wants to extend before you have it bolted into place. This handy tool will back off the cam chain tensioner mechanism and hold it for you. No more awkward 3-handed contortions are required to get the tensioner installed.
Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
Lower Stiction, Longer Life! It doesn’t get any better than this!
Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance.
Kit includes Fork Seals and dust wipers.
Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.
Does not fit OEM XR650L metal tank