Same-day shipping cutoff: Noon Pacific Time

Are you excited about the idea of being featured in our monthly newsletter? We would absolutely love to hear your story and learn more about you and your incredible adventures! Please feel free to share with us HERE.

SV650

Chain Size:            Front Sprocket:            Rear Sprocket:            Front Tire:            Rear Tire:            Spark Plug:
525x110 15T 45T 120/60-17 160/60-17 CR8E

 

Featured Products

Universal fit. May require additional adjustment or modification.

It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.

Sold in pairs.

Hand/brush guards are required for proper fitment and for safety reasons.

Hippo Hands go on and off in seconds and never require tools or hardware.

The Backcountry is 9" deep.

If you like to stand and ride, this is the model for you! But… these hand covers also fit to just about any bike. They are also a great option for cruisers with hand guards or lever guards.

They feature a durable, quilted interior and flexible, neoprene cuff which ensures a great fit on so many bikes. The Backcountry is their smallest, most easily adaptable hand cover. 

The Backcountry features a front reflective panel for higher visibility in low light situations.

Choose Model
Ships same business day
$129.95

Engine

SV650 '99 - '08

2mm oversize from stock.

Requires cylinder boring only. Bore Diameter: 83mm, Piston Diameter: 82.95 mm

12.5:1 compression. Includes pistons, rings, pins, clips and head gaskets.

Please contact us for availability information
$449.95

CNC machined from billet aluminum and then finished in a beautiful gunmetal color. These replace the factory automatic tensioners that can fail. These tensioners eliminate the timing problem that can be caused by the automatic devices. Also gets rid of the excessive tension and premature engine wear caused by the stock unit.

Includes:

  • 2 tensioners
  • Gaskets
Please contact us for availability information
$117.95
SV650 '99 - '25

Your automatic cam chain tensioner is spring loaded. This can make it difficult to install as it wants to extend before you have it bolted into place. This handy tool will back off the cam chain tensioner mechanism and hold it for you. No more awkward 3-handed contortions are required to get the tensioner installed.

Ships in 3-5 business days
$99.95
SV650 '99 - '25

7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.

141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?

Ships same business day
$114.95
Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.

29mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

BMW / KAWASAKI / YAMAHA

Ships same business day
$219.95
Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

These kits fit multiple brands and models, please verify correct size for your model before purchase.

13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

KAWASAKI

Choose Shim Size
Ships same business day
$219.95
SV650 '99 - '12

Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar.

Ships in 1-2 business days
$29.95
SV650 '99 - '25

Complete set of clutch friction plates for your V-Strom.

Ships same business day
$99.95
SV650 '99 - '25

High quality clutch cover gasket. If you are servicing your clutch, a new gasket will prevent oil leaks.

Add Gasket Remover
Please contact us for availability information
$17.95
  • Constructed using the best materials available
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 oil filters
Ships same business day
$35.95
SV650 '99 - '25

A 10-pack of drain plug sealing crush washers. Replace your sealing washer at every oil change to prevent a leak.

Ships same business day
$6.95
SV650 '99 - '25

Extra protection for your motor! Strong magnet at the end of the plug picks up ferrous metallic flakes in your oil, protecting your engine!

Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 14mm, 16mm, 18mm, 21mm.

Choose Size
Ships same business day
$14.95

Keep your motor running right with a fresh plug.

A Dual Electrode spark plug will last longer than a single electrode plug because the wear is shared between the electrodes.

Choose Spark Plug
Ships same business day
$12.95
SV650 '99 - '25

E3 Resistor Spark Plugs

  • Unique electrode shape maximizes the power created by the spark plug – Diamond Fire technology
  • Electrode is a combination of performance and technology that results in an improved flame kernel shape
  • This flame front ignites the bulk air/fuel mixture faster, moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke
  • The result is more complete combustion and an improvement in engine performance
  • A truly premium performance plug
  • Sold individually, unless otherwise stated.

(Pair)

Add Anti-Seize
Ships same business day
$19.95
SV650 '99 - '25

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

Add Anti-Seize
Ships same business day
$23.95
SV650 '99 - '25

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

  • High-quality materials and superior construction for serious power and reliability
    • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
    • Deep-seated copper core for a wider heat range
    • Nickel alloy tip for longer life
    • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
  • Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
  • NGK plugs available for almost every application and riding style
Add Anti-Seize
Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.
  • Contains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads)
  • Can be used to install and adjust timing of any cam
  • Wooden carrying case
Ships in 3-5 business days
$315.95
Universal fit. May require additional adjustment or modification.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

Ships same business day
$32.95
Universal fit. May require additional adjustment or modification.

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

Please contact us for availability information
$112.95
SV650 '99 - '25

Special tool to remove the flywheel from the end of the crankshaft.

Ships in 3-5 business days
$12.95
Universal fit. May require additional adjustment or modification.

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

Ships same business day
$13.95
Universal fit. May require additional adjustment or modification.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.
  • 26 straight blades
  • SAE and metric markings
  • Check for clearance on valves, ignition points etc.
  • Includes 26 blades varying in thickness from .0015"/.038 mm to .025"/.635 mm
Ships same business day
$12.95

Fuel and Intake

SV650 '02 - '11

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after March 2024
$249.95
SV650 '99 - '02

For mildly tuned machines using the stock airbox, with stock or K&N filter. May also be used with a good aftermarket exhaust system

  • Provides a simple and affordable solution to carburetor tuning problems.
  • Allows you to tune your bike for increased power and smoothness while retaining fuel economy.
  • Includes a guide booklet on how to install and use your jet kit to it's full potential.
  • For a top quality installation we recommend adding an extended fuel screw and a set of replacement carb screws.

Stage 1 Kit Intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe Fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters like K&N Designed to improve throttle response and driveability In most cases power increases of approximately 5% throughout the entire power range can be achieved

Add Pocket Tuner Tool
Ships in 3-5 business days
$108.95
Universal fit. May require additional adjustment or modification.

Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.

Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)

Ships same business day
$8.95
SV650 '03 - '09
  • Increased air flow over the stock air filter.
  • Designed to increase horsepower and throttle response.
  • Easily fits inside the factory air box.
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions.
  • Four layers of premium cotton gauze provides outstanding filtration.
  • Washable & re-usable, never wears out.
  • One filter will last the lifetime of your bike.
Ships in 3-5 business days
$97.95
Universal fit. May require additional adjustment or modification.

Sold in 6 packs

  • Compatible with many air filter boxes. Easy to install by drilling 1’’ holes in airbox housing and snap fitting vents in.
  • May be cleaned and re-oiled
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter

Not legal for use on pollution controlled vehicles in the state of California.

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Ships in 1-2 business days
$9.95

Gas Tanks

Universal fit. May require additional adjustment or modification.

TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.

This universal precut kit includes left and right tank grips. (8" X 3") Triangle

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

  Fits Acerbis, IMS and Safari tanks only.

Ships same business day
$39.95
Universal fit. May require additional adjustment or modification.

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
Ships same business day
$35.95
Universal fit. May require additional adjustment or modification.

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

Ships same business day
$8.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 1/4" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Select Product
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 5/16" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Choose Size & Type
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

Ships same business day
$43.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
Ships same business day
$52.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Ships same business day
$62.95
Universal fit. May require additional adjustment or modification.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
Ships same business day
$87.95
Universal fit. May require additional adjustment or modification.

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
Ships in 3-5 business days
$112.95
Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Ships same business day
$22.95

Body

Universal fit. May require additional adjustment or modification.

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. 14" tall & 10" wide.

Will not fit 1 1/8" oversize handlebars.

Choose Color
Ships same business day
$129.95

Transform your ride
Get that pressure off of your face and chest! MadStad's quick-release mounting system gives you touring comfort on your naked bike. Adjust the height and angle of our windshield to dial in smooth airflow and a more comfortable ride while still looking over the shield. You can switch back to naked bike in seconds, without tools, however you will be so much more comfortable you may not want to!

What's included in the kit
Their complete drop-in quick-release system is custom-made for the SV650 and includes everything needed to mount and position the shield. Your bike will not require any modification. Here are the system components:

  • Fork-mount quick release brackets
  • Adjustable shield brackets
  • The acrylic windshield
  • Solid aluminum 7/8" crossbar

The quick-release base brackets mount to your forks. The adjustable shield brackets lock onto the base and with the shield system attached you can adjust it for the optimum height, angle and airflow to dial in the comfort for your particular height and riding position. They included a long 7/8" crossbar both for stability and so you can mount your smartphone or GPS unit up higher front-and-center where you can more easily see it.

If you want to go back to stock naked bike configuration simply release the locking plungers and slide the system off. Keep in mind that the crossbar, and anything you may have mounted to it, will also come off with the system.

MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic.

Please contact us for availability information
$279.95
Universal fit. May require additional adjustment or modification.

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
Ships in 3-5 business days
$119.95
Universal fit. May require additional adjustment or modification.

Universal design. Vents in the back improve airflow to motor. Smaller front reduces 'wind steer' and improves high speed stability.

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.

Ships same business day
$23.95
Universal fit. May require additional adjustment or modification.

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Depending on your application and preferences, more than one heat shield may be useful.

Dimensions: 2"x3'

Ships same business day
$14.95

Seats

Sargent's proprietary seat foam has their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for long distance comfort.

Black piping. Complete seat with matching rear seat cover for 2003 only.

Ships in 3-5 business days
$399.95
Universal fit. May require additional adjustment or modification.

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

Ships same business day
$69.95
Universal fit. May require additional adjustment or modification.
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
Ships same business day
$112.95
Universal fit. May require additional adjustment or modification.

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Ships same business day
$97.95

Armor - Bike Protection

Universal fit. May require additional adjustment or modification.

Don't cut the ball ends off of your levers! These billet spacers move your hand guards outward to allow clearance for the full length of the stock levers. Designed to fit steel or aluminum bars. Includes longer stainless steel mounting bolts.

Developed for the DR650 but may work on other models with long levers. (May require additional adjustment or modification on some models.) 

  Not compatible with Acerbis and Emgo hand guards

Ships same business day
$32.95
Universal fit. May require additional adjustment or modification.

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.

For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.) 

Choose Handguard
Add Handguard Extenders
Ships same business day
$67.95
Universal fit. May require additional adjustment or modification.
  • High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
  • Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
  • Small integral spoiler incorporated into design
  • X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.

Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

 

Ships same business day
$104.95
Universal fit. May require additional adjustment or modification.

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

X-Factor guards may require you to cut your lever ends down, or use short levers.

Ships same business day
$139.95
Universal fit. May require additional adjustment or modification.

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

Ships same business day
$22.95
Universal fit. May require additional adjustment or modification.

The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.

A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.

Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.

Ships in 3-5 business days
$99.95
Universal fit. May require additional adjustment or modification.
  • Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
  • Sleek aerodynamic look.
  • Forged Steel with powder coat finish.
  • Fit in conjunction with most Barkbusters backbones (except EGO).
  • Fits externally to the VPS backbone.
  • Available in black.
  • Sold as a pair

Weight:
360 grams/pair or
180 grams/each

Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required

BHG-010             Requires two additional M6x40mm countersunk bolts

BHG-032             R1200GS/A requires two additional M8x55mm countersunk bolts

BHG-045              G650GS requires two additional M6x65mm countersunk bolts

BHG-050              Will not fit

BHG-051              Requires two additional M6x50mm countersunk bolts

BHG-059              Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit

BHG-075              Will not fit

BHG-079              Will not fit

Ships same business day
$64.95
Universal fit. May require additional adjustment or modification.

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions

Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
Ships same business day
$129.95
Universal fit. May require additional adjustment or modification.

Maximize your wind protection with the Barkbusters largest handguard plastic! For use with single sided Storm mount and all Barkbusters backbone handguards

Ships same business day
$44.95
Universal fit. May require additional adjustment or modification.

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions

Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
Ships same business day
$134.95
Universal fit. May require additional adjustment or modification.

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

Ships same business day
$49.95
Universal fit. May require additional adjustment or modification.
  • VPS Skid Plate (set of 2).
  • Fit in conjunction with VPS plastic guards on a Barkbusters backbone.
  • Protects the outer edge of the aluminum backbone.
  • Adds a stylish finish to the handguard.
  • Available in Black only.
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color. 

Must add the corresponding size mounts to fit your handlebar.

For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.) 

Please Note: These handguards do not fit the Yamaha T7

Add Required Mounts
Add Handguard Extenders
Ships same business day
$93.95
Universal fit. May require additional adjustment or modification.

You can keep your Cycra handguards even if you upgrade your handlebars to a different width.  

Replacement mounts that keep your Cycra handguards fresh and tight.

CNC-machined from billet aluminum for the best fit and strength.

Please Note: These handguards do not fit the Yamaha T7

Choose Handlebar Size
Ships same business day
$49.95
Universal fit. May require additional adjustment or modification.

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

Ships same business day
$21.95
Universal fit. May require additional adjustment or modification.

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. 

The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. 

The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. 

The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence. 

Kit includes mounts. Optional replacement mounts available.

Choose Type
Ships in 3-5 business days
$99.95
Universal fit. May require additional adjustment or modification.

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
Ships in 3-5 business days
$104.95
Universal fit. May require additional adjustment or modification.

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
Ships same business day
$123.95
Universal fit. May require additional adjustment or modification.

Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.

  • Cold/wet weather comfort
  • Brush, mud and trail protection
  • Strap on/off in seconds
  • Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
  • Tough stretch polyurethane strap (can be used separately)
  • Custom wind foil shapes
  • No stitching or pieces to fail
  • When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
  • Made in USA

REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.

Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)

Please contact us for availability information
$59.95
Universal fit. May require additional adjustment or modification.

It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.

Sold in pairs.

Hand/brush guards are required for proper fitment and for safety reasons.

Hippo Hands go on and off in seconds and never require tools or hardware.

The Backcountry is 9" deep.

If you like to stand and ride, this is the model for you! But… these hand covers also fit to just about any bike. They are also a great option for cruisers with hand guards or lever guards.

They feature a durable, quilted interior and flexible, neoprene cuff which ensures a great fit on so many bikes. The Backcountry is their smallest, most easily adaptable hand cover. 

The Backcountry features a front reflective panel for higher visibility in low light situations.

Choose Model
Ships same business day
$129.95
Universal fit. May require additional adjustment or modification.

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

Ships same business day
$35.95

Controls

Universal fit. May require additional adjustment or modification.

Comfortable Oversize (or Fat Bar) Handlebars.

  • Black in color. 
  • Constructed of high-quality 7065-T6 aluminum
  • Lighter and stronger than regular bars
  • No-crossbrace allows flex to reduce shock and rider fatigue
  • Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
  • Etched alignment marks for fast and accurate positioning
  • Flex Series pad included
  • Works with stock controls and cables.

For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter (sold separate).

Ships same business day
$79.95
Universal fit. May require additional adjustment or modification.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WidthHeightRise
813mm160mm104mm
Clamp AreaSweepControl Area
236mm100mm199mm
Please contact us for availability information
$74.95
Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
  • Requires 7/8" factory bar clamps on bike

Choose Bar Size
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.

These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).

Choose Color
Ships same business day
$171.95
Universal fit. May require additional adjustment or modification.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Choose Color
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
Ships in 1-2 business days
$49.95
Universal fit. May require additional adjustment or modification.

Protect your thumbs from blisters caused by riding on the inside of your grips.

Sold in Pairs.

Ships same business day
$4.95
Universal fit. May require additional adjustment or modification.

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
Ships same business day
$66.95
Universal fit. May require additional adjustment or modification.

These heated grips from Koso have been tested by us and we can say they will keep your hands warm and give you the grip you need in off road conditions, thanks to the full diamond grip design.

  • Clamp-on grips do not need adhesive
  • External temperature controller with 5 heat levels
  • For use with twist throttle; includes interchangeable throttle cams
  • Requires 35W and draws 2.5 amps per pair; low voltage shut off
Ships in 3-5 business days
$155.95
Universal fit. May require additional adjustment or modification.

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
Ships in 3-5 business days
$144.95
Universal fit. May require additional adjustment or modification.
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

Add Grip Glue
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after February 2024
$13.95
Universal fit. May require additional adjustment or modification.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
Ships in 3-5 business days
$16.95
Universal fit. May require additional adjustment or modification.
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

Ships same business day
$19.95
  • The new 3rd generation Motion Pro Revolver variable rate throttle system is here!
  • Innovative reel changing system lets you tailor the throttle rate to your preference and riding conditions
  • 5 different reels provide perfect throttle response for any condition. Use smaller reels for slower throttle rate and larger reels for faster throttle rate. Included cam reel provides progressive throttle response preferred by some riders
  • Slim REV3™ throttle housing allows more room for lever clearance and adjustment to throttle housing position
  • Improved throttle stop provides greater strength and durability
  • Snap together elbows makes it even easier to install and change reels
  • Cable boot keeps dirt and dust out for reliable and smooth operation
  • REV3™ off-road kits are compatible with the new Motion Pro DirtControl™ V2 Lock-On grips and ODI Lock-On grips
  • Billet aluminum inline cable adjusters ease installation and adjustment
  • Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight
  • Upper section of cables use 6 mm housing to provide solid support of adjusters
  • Simple to install and maintain
  • Patented


Kit includes:

  • REV3™ throttle assembly with throttle tube (REV3™ off-road kits include the unbreakable Titan Throttle Tube™)
  • Motion Pro REV3™ black vinyl cables specifically designed for your bike
  • REV3™ sportbike kits include Motion Pro RoadControl™ grips
  • Four interchangeable round reels: 35 mm, 40 mm, 45 mm, 50 mm
  • Progressive cam reel - Sportbike kits include road race profile cam reel (orange)
Please contact us for availability information
$159.95